How to Clean a Blender? Ultimate Guide That You Should Know

Blenders are essential kitchen appliances that help us prepare our favorite smoothies, soups, and sauces. But just as important as using a blender is keeping it clean and well-maintained. 

A dirty blender can be a breeding ground for bacteria and affect the flavor of your food. Now a question will pop into your head: How to clean a blender?

Let’s review some tips and tricks to help you clean your blender effectively. By following these steps, you can ensure that your blender stays in good condition and continues to produce delicious creations for years to come.

How to Clean Blender Blades?

Blender blades can be dirty, and it’s easy to prevent them from becoming that way by following these simple steps:

1.Disassemble the Blender

Before you start cleaning the blades, make sure to disassemble the blender. This means removing the jar, blade assembly, and other detachable parts. This will make it easier to clean each part separately and ensure that no part is left uncleaned.

How to clean blender blades

2. Wash the Blades with Soap and Water

Washing mixer blades with soap and water is the easiest and most effective way to clean them. Mix a light dish soap and warm water. Dip the blender blades into this solution and use a soft-bristled brush to scrub off any food bits. 

Make sure to clean the blades on both sides, paying particular attention to the spaces between them. Rinse the blades well with water and dry them with a clean towel.

3. Use Baking Soda and Vinegar

Baking soda and vinegar can clean tough blade stains. Make a paste using equal parts baking soda and water. Leave this paste on the blades for 10-15 minutes. 

Let the paste fizz with vinegar. Scrub and rinse the blades. Clean towels and dry the blades.

4. Clean the Blender Jar

Clean the blender jar after cleaning the blades. Fill the jar with warm water and a few drops of dish soap. Rinse the jar after briefly blending. A bottle brush can remove tenacious stains from the inside of the jar.

5. Dry the Blender Parts

After you’ve cleaned all the blender parts, dry them well. Wipe them down with a clean towel or let them dry naturally. Ensure that none of the parts are still wet, which can cause germs to grow.

How To Deep Clean A Blender?

Blenders are an essential appliance in any kitchen. They are great for making healthy smoothies, purees, and shakes. 

After this appliance gets dirty, you must clean it for further use. Let’s discuss step by step how you can clean a blender properly:

Step 1: Disassemble Your Blender

The first step in thoroughly cleaning your blender is to take it apart. This means taking off the blender jar, lid, and blades. Ensure the blender isn’t plugged in before taking it apart.

Step 2: Soak The Blender Jar And The Blades

The blender jar and the blades are the two components that get the most use and, therefore, the dirtiest.

Fill the blender jar with warm water and a few drops of dish soap to clean them. Place the blades in the jar and let them soak for at least 15 minutes.

Step 3: Clean The Blender Jar And The Blades

After soaking, use a soft sponge or brush to scrub the blender jar and the blades. Make sure to clean all sides of the jar and the blades thoroughly. If you have difficulty reaching some areas, use a toothbrush to clean them.

How To Deep Clean A Blender

Step 4: Rinse And Dry The Blender Jar And The Blades

Once you have cleaned the blender jar and the blades, rinse them thoroughly with warm water. Remove all soap residue from the blender jar and the blades. Then, dry them with a clean towel or let them air dry.

Step 5: Clean The Lid And The Base

While the blender jar and the blades are soaking, you can clean the lid and the base of the blender. Use a soft sponge or cloth to wipe them clean. If there are any stubborn stains or residues, use baking soda and water to scrub them off.

Step 6: Reassemble The Blender

After all the components are clean and dry, it’s time to reassemble the blender. Ensure the blades are back in the jar correctly and the lid is securely in place. 

Then, plug the blender back in and give it a quick test run to ensure everything works correctly.

Deep cleaning of your blender is essential to maintaining its performance and longevity. By following these simple steps, you can easily clean your blender and keep it looking and working like new. 

Can you put Blender in Dishwasher?

A blender is an essential kitchen tool if you’re a fan of smoothies or homemade soups. But what do you do when it comes time to clean your blender? Can you put it in the dishwasher, or is that a big no-no? 

Before cleaning any appliance, it’s crucial to check the manufacturer’s instructions. Some blenders are safe for the dishwasher, while others are not. 

If your blender is made of plastic or has detachable parts such as blades or lids, it can be washed in the dishwasher without any issues.

How to clean Blender Base?

Unplug your blender before cleaning it to avoid electrical accidents. Remove any leftover food particles or spills on the base using a damp cloth or paper towel. 

If you encounter stubborn stains or residues, mix baking soda and water to create a paste and apply it to the affected areas. Leave it for 10-15 minutes before wiping it off with a clean cloth.

How to clean Blender Base

To deep clean your blender base, remove all detachable parts, such as the blades and gasket seal, then soak them in warm soapy water for at least 30 minutes.

How to Clean Blender Bottle?

you should always clean your blender bottle immediately after using it. This will reduce the chances of any food particles sticking to the walls and bottom of the bottle. 

How to Clean Blender Bottle

Then Remove any remaining liquid or food from the bottle before washing it. Rinse it with warm water and add dishwashing soap to your blender bottle. 

Next, put hot water into your blender bottle until it fills halfway. Then put the lid back onto your blender and start blending for about 30 seconds on the high-speed setting.

How to Clean a Blender Bottle That Smells?

To clean a blender bottle that smells, disassemble the parts, rinse it quickly after each use, soak it in a mixture of water and white vinegar, scrub with a baking soda paste, rinse with lemon juice, clean regularly with a bottle brush, and air dry all components thoroughly before reassembly.

How Do I Deep Clean and Sanitize my Blender?

Occasionally, a regular cleaning may not suffice, and a thorough deep clean is necessary to maintain your blender in optimal condition.

Running your blender on high power with a mixture of ¼ cup warm water and ¾ cup white vinegar or a combination of ¼ cup baking soda and ¼ cup warm water can effectively deep clean and sanitize it.

This simple yet powerful method helps eliminate stubborn residues and keeps your blender in top-notch shape.

How to clean an immersion blender?

The first step in cleaning your immersion blender is to unplug it from the power source and disassemble it. 

You can remove the blending shaft by turning it counterclockwise and gently pulling it out of the motor unit. 

How to clean an immersion blender

Next, rinse the shaft under running water or soak it in warm soapy water for easy cleaning. Use a soft sponge or cloth to carefully wipe away any food particles on the blade.

After cleaning the blending shaft, focus on cleaning other parts of your immersion blender. The motor unit should never be submerged in water as this could damage its electrical components.

How to clean Nutribullet blender pitcher?

Disassemble your blender pitcher into its parts. This includes the blade assembly, gasket seal, and any other detachable components.

Be careful when handling the sharp blades! Next, rinse each part under warm water to remove any large pieces of food debris or residue. 

After rinsing, apply dish soap onto your sponge or brush and scrub each component thoroughly until all visible dirt is gone.

Pay close attention to the blades and gasket seal as those areas accumulate food particles more efficiently. Rinse everything with warm water again until there’s no soap left behind.

FAQ.

How do I clean my blender effectively?
Fill the blender halfway with warm, soapy water, run it for a minute, rinse, and dry.

Can I put my blender parts in the dishwasher?
Check the user manual. Some parts are dishwasher-safe, others aren’t.

How do I remove stubborn stains or odors from the blender jar?
Use a baking soda paste for stains and a vinegar-water mixture for odors.

Final Verdict

If you have a blender, it is best to clean it regularly to keep it running smoothly. Blenders are delicate and should not be handled forcefully, so use caution when cleaning them. You have to know how to clean a blender properly. Always use a wet cloth and avoid using harsh chemicals.

About The Author

John Philips

I'm John Phillips; I love to share my experience with everyone. I researched blender a lot, and I will provide my every guideline in this blog so that you can be benefited.

Leave a Comment