Why is My Blendjet Flashing Red and Blue, and How to Fix it?

Have you ever encountered a situation where your Blendjet started flashing red and blue? It can be concerning when your trusty blending companion suddenly exhibits this behavior. 

Well, worry no more! In this article, I will share the reasons behind the perplexing phenomenon of a Blendjet flashing red and blue. 

Whether you are a proud owner of this handy kitchen gadget or considering purchasing one, understanding the possible causes behind these blinking lights will help you troubleshoot any issues effectively and ensure smooth blending experiences on the go. 

So let’s dive in and unravel why your Blendjet might be flashing red and blue.

What Does The Blue Light On Blendjet Mean?

The blue light on the Blendjet serves as an indicator for various functions and status updates. Firstly, when you turn on your Blendjet, the blue light will illuminate to confirm that it is powered on and ready for use. 

This simple yet effective feature ensures that users can easily identify whether their device is functioning properly.

The blue light also indicates when your Blendjet is in blending mode. The blue light will remain steady when you press the blend button to blend your ingredients. 

It provides a visual cue to inform users that their blender is actively working to create their desired blend.

Blue Light On Blendjet
Blue Light On Blendjet

Why is My Blendjet Blinking Red?

A blinking red light on your Blendjet portable blender can cause concern, but there’s no need to panic. 

This indicator light serves as a warning signal, signaling that something might be amiss with your device. 

Firstly, check if the blender is assembled correctly and the lid is tightly secured. The blinking red light often indicates that the lid isn’t locked securely, preventing the blender from operating.

If the lid is locked in place, but the red light continues to blink, it might be due to a power issue. 

Ensure your Blendjet is fully charged or has enough battery life to complete a blending cycle. 

If the battery level is low, plug in your blender and wait until it reaches an adequate charge before using it again.

Blendjet Blue Light On But Not Working 

If you own a Blendjet portable blender, you might have encountered a frustrating situation where the blue light is on, but the device simply refuses to function. 

Before you panic and assume your beloved blender has reached its untimely end, there are a few troubleshooting tips to help get it up and running again.

Firstly, check if the blade assembly is attached correctly. Sometimes, if it’s not securely fastened onto the jar, the blue light will turn on, but the blending function won’t activate. 

Gently twist and tighten until you hear a click to ensure it’s fully locked. If this doesn’t solve the issue, try recharging your Blendjet by connecting it to a power source with the included USB cable.

Blendjet Blue Light On But Not Working 
Blendjet Blue Light On But Not Working 

Reasons For Blendjet Flashing Red And Blue

Reasons For Blendjet Flashing Red And Blue If you are a proud owner of a Blendjet portable blender, you may have encountered a situation where the device starts flashing red and blue. 

This can be quite perplexing, especially if you are in the middle of blending your favorite smoothie or trying to whip up a quick snack. 

I will explore why your Blendjet might be flashing red and blue and provide possible solutions to help you get back to blending in no time.

1. Low Battery

The most common reason for Blendjet flashing red and blue lights is a low battery. The blender automatically activates the low battery indicator when the battery level drops below a certain threshold, causing the lights to flash. 

  • Tips: To resolve this issue, simply charge your Blendjet using the included USB cable. Once the battery is fully charged, the flashing lights should stop.

2. Overheating

Blendjet has a built-in safety feature that protects the motor from overheating. If the blender is used continuously for an extended period, it may trigger the overheating protection mechanism, causing the lights to flash. 

In such cases, give your Blendjet time to cool down before using it again. It’s also a good practice to avoid blending thick or frozen ingredients for excessive time, as this can contribute to overheating.

3. Blade Jam

Another reason for Blendjet flashing red and blue lights could be a blade jam. If the blades are obstructed, or there are excessive ingredients in the blender, it can strain the motor, triggering the flashing lights. 

  • Tips: To fix this issue, switch off the Blendjet, remove the power source, and remove any obstructions or excess ingredients from the blending jar. Once cleared, restart the blender, and the lights should stop flashing.

4. Motor Malfunction

In rare cases, Blendjet flashing red and blue lights could indicate a motor malfunction. If none of the above troubleshooting steps resolve the issue, it may be time to contact Blendjet’s customer support for further assistance. 

They can guide you through additional troubleshooting steps or advise on repairs or replacements if necessary.

Remember, to prolong the lifespan of your Blendjet and prevent any issues, follow the manufacturer’s guidelines and recommendations.

Reasons For Blendjet Flashing Red And Blue
Reasons For Blendjet Flashing Red And Blue

How To Fix Blendjet Red And Blue Lights Flashing?

Many Blendjet users have encountered this issue, but luckily, there are a few simple steps you can take to fix it.

First, let’s understand why the red and blue lights are flashing. Typically, this happens when the Blendjet is having trouble charging. 

It could be due to a faulty charger, a loose connection, or a problem with the battery itself. Now, let’s dive into the steps you can take to resolve this issue.

1. Check the charger

Start by inspecting the charger. Ensure that it’s not damaged or frayed. If you notice any issues, such as exposed wires or bent pins, it’s time to replace the charger. 

Using a faulty charger can cause further damage to your Blendjet, so investing in a new one is best.

2. Clean the charging port

Sometimes, the flashing lights can be caused by a dirty charging port. Take a close look at the port and gently clean it using a dry, soft cloth or a cotton swab. 

Be careful not to damage the port while cleaning. Once it’s clean, try charging your Blendjet again.

3. Reset the Blendjet

If the flashing lights persist, try resetting your Blendjet. To do this, locate the reset button on the bottom of the blender. 

Use a small pin or paperclip to press and hold the reset button for a few seconds. This should reset the device and clear any temporary issues.

4. Use a different power source

Sometimes, the problem may lie with the power source itself. Try connecting your Blendjet to a different outlet or USB port to see if that resolves the issue. 

The previous power source needed more power to charge the blender properly.

5. Contact customer support

If none of the above steps work, it’s time to contact Blendjet’s customer support team. They have trained professionals who can provide further assistance and guide you through troubleshooting. 

They may offer additional solutions or advise you to send in your Blendjet for repairs if necessary.

Why is my BlendJet Blender not spinning?

You’re not alone if you’ve wondered why your BlendJet Blender isn’t spinning. This common issue can be frustrating, especially when you need a quick and convenient blend on the go. 

There are several possible reasons why your BlendJet Blender may need to be spinning, ranging from simple fixes to more complex issues.

Firstly, check if the blender is charged correctly. A rechargeable battery powers the BlendJet Blender, so ensuring it has enough power is important. 

If the battery is low or completely drained, connect your blender to a power source using the included USB cable and give it some time to charge. 

Additionally, ensure all blender parts are securely attached and aligned correctly. Sometimes improper assembly can prevent the blades from spinning correctly.

Another potential reason for the lack of rotation could be an obstruction in the blending chamber.

Why is my BlendJet Blender not spinning?
Why is my BlendJet Blender not spinning?

Can You Use the Blendjet While Charging?

Yes! Unlike many other electronic devices, the BlendJet is designed to be used while plugged in.

Using the BlendJet while it’s charging offers a unique advantage. You can continue blending your favorite smoothies or shakes without worrying about running out of battery power. 

This feature is handy when you’re on the go and need a quick boost of energy or nutrition. 

Whether at work, the gym, or simply outdoors, using your BlendJet while it charges allows for uninterrupted blending whenever and wherever you need it most.

Why My Blendjet Flashing Purple?

If your BlendJet is flashing purple, it typically indicates that the blender needs to be charged. The purple flashing light is a low battery indicator.

Connect your BlendJet to a USB power source using the provided cable and allow it to charge until the light turns solid, indicating a full charge. This should resolve the flashing purple light issue.

Why My Blendjet Flashing Red and Blue while Charging?

There’s no need to panic, as this is a regular occurrence with the Blendjet portable blender. The flashing red and blue lights indicate that your device is in pairing mode, which allows it to connect wirelessly to other devices.

When you plug in your Blendjet for charging, it automatically enters pairing mode until it reaches a certain battery level. 

This means that if you see the red and blue lights blinking, it’s simply attempting to connect with another device via Bluetooth. 

Once it reaches the desired battery level or establishes a successful connection, the flashing lights will stop, and your Blendjet will continue to charge usually.

So, next time you see your Blendjet flashing red and blue while charging, rest assured, knowing that there’s nothing wrong with your device.


How can I fix the flashing red and blue lights on my Blendjet?

To resolve the issue, try charging your Blendjet for at least 2 hours using the provided cable. If the problem persists, contact Blendjet customer support.

Can I use my Blendjet while it’s flashing red and blue?

It is not recommended to use the Blendjet while it’s flashing red and blue, as it indicates a potential battery problem that could affect its performance.

How long does it take to charge the Blendjet and stop the flashing lights?

Charging time may vary, but typically, it takes around 2 hours for the Blendjet to fully charge and stop the flashing red and blue lights.

Final Thoughts on Why is My Blendjet Flashing Red and Blue

Understanding why your BlendJet is flashing red and blue is essential for troubleshooting the issue effectively. 

The combination of these colors usually indicates a low battery or a malfunction with the motor. By following the steps mentioned earlier, such as charging the device properly or resetting it, you should be able to resolve the problem in most cases. 

However, if the issue persists, it is recommended to contact BlendJet’s customer support for further assistance. 

Remember, taking care of your BlendJet and addressing any issues promptly will ensure you can continue enjoying its convenience and portability in your daily life.

About The Author

John Philips

I'm John Phillips; I love to share my experience with everyone. I researched blender a lot, and I will provide my every guideline in this blog so that you can be benefited.

Leave a Comment